Search Filters
Search Results
50 total results found
System Overview
The RS-232 DMX Engine is a self-contained DMX controller. It accepts simple, human-readable com...
Jog a Channel
Individual DMX channels may be jogged up and down. In this mode, it is not required to know the c...
Example: An RGB Stage Light
Every lighting equipment manufacturer sets up their equipment in a slightly different way. For t...
Step 4: Exit ‘MIDI Monitor’ and Drive the Lighting Equipment
The DecaBox responds to Note, Program / Patch Change (PC) and Continuous Controller (CC) messages...
Step 3: Use MIDI Monitor Mode to Confirm Valid Data
The MIDI monitor screen is several functions deep from the main run screen. It can be accessed b...
Step 2: Set the DMX Equipment to a Known Start Address
When we do telephone support, we often suggest setting the first lighting fixture to DMX channel ...
Step 1: Set the DecaBox to the Correct MIDI Channel
In the MIDI world, there are 16 channels available. Between 1 and 16 channels can be transmitted...
Quick Start
How to Easily and Accurately Control DMX Lighting Gear From Your Existing MIDI Equipment Kick t...
Basic System Information
This firmware personality for the DecaBox receives MIDI note and CC information on a user-speci...
Recall a Scene
Recalling a Stored Scene SXXX:TTT[cr] S is a capital S...
Overview
This useful firmware revision was first commissioned by the production crew of a long-running (...
Store a Scene
Up to 63 DMX scenes may be saved in memory. A scene is a copy of the current DMX output buffer. T...
Build A Scene (A)
The A command allows new channel:value combinations to be stacked on the existing DMX output univ...
Build a New Scene (F)
Building a New Scene This command is useful but tricky. ANY CHANNEL not specifically called out ...
Set Startup Scene & Timeout Delay
It may be useful for the DMX engine to auto-load a stored scene immediately after a power cycle. ...
Overview
In the following pages, the text [cr] is used to represent a single data byte, the carriage retur...
Purchasing
If you've landed here via a web search, don't already own one of these systems, but would like to...
Command Formatting & Syntax
Build MIDI Messages One Byte at a Time Most MIDI messages are sequences of ...
Connections
Required connections are: DC 9V, 300 mA, center positive. This adapter is supplied with...
The Internal Dimming Engine
It can be useful to slowly fade lights up and down. One method to set this up in a sequencer is ...